Gigalight


Font Size:big  middle  small

The Best Choice of 4WDM-40 Optical Transceivers

Number of visits: Date:2018-7-26 16:05

Abstract:

The 4WDM-40 optical transceiver is an optical interconnection solution for 100G 40km long-haul Data Center Interconnect (DCI) application. There are types of 4WDM-40 optical transceivers according to the 4WDM-40 MSA technical specifications.


"This specification defines 4x 25Gb/s Local Area Network Wavelength Division Multiplex (LAN-WDM) optical interfaces for 100Gb/s optical transceivers for Ethernet applications including 100GbE. Forward error correction (FEC) is a link requirement in order to ensure reliable system operation. Two transceivers communicate over single mode fibers (SMF) of length from 2 meters to at least 20 or 40 kilometers. The transceiver electrical interface is not specified by this MSA but can have, for example, four lanes in each direction with a nominal signaling rate of 25.78125Gb/s per lane.


Different form factors for the transceivers are possible. The QSFP28 module is expected to be a popular form factor for these applications. Other form factors are possible and are not precluded by this MSA."


We know that the form factors of 4WDM-40 optical transceiver mainly include QSFP28, CFP4, and microQSFP. However, there are only QSFP28 4WDM-40 transceivers on the market by now because the QSFP28 form factor is the most popular. In fact, there are only a few optical transceiver manufacturers who can supply the 4WDM-40 transceivers. They are Finiar, Oclaro, Eoptolink, and Gigalight. The following table shows the main features of their 4WDM-40 products.


Manufacturer Gigalight Finisar Oclaro Eoptolink
P/N GQS-SPO101-4ER4C FTLC2151RDPL TRQ5E50ENF EOLQ-161HG-40-L7
Form Factor QSFP28 QSFP28 QSFP28 QSFP28
Application 100GE 100GE 100GE 100GE
Max Distance 40km 40km 40km 40km
Max Data Rate 103Gb/s 103Gb/s 103Gb/s 103Gb/s
Max Power Consumption 3.8W 4.5W 5W 5.5W
Operating Temperature 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C

From this table, we can see that the only difference is the "Max Power Consumption". For optical transceivers, lower power consumption means less heat, reducing the pressure of heat dissipation in the data centers. So, considering the power consumption, the Gigalgiht GQS-SPO101-4ER4C QSFP28 4WDM-40 optical transceiver is the best choice, while the Finisar FTLC2151RDPL is the second choice.


Gigalgiht GQS-SPO101-4ER4C QSFP28 4WDM-40 Optical Transceiver


In fact, these manufacturers also supply other 4WDM-40 MSA compliant transceivers. Finisar and Oclaro also supply dual-rate QSFP28 4WDM-40 transceivers for both 100GE and OTU4. The max data rate of these optical modules is 112Gb/s. These modules can be used not only for DCI application but also for optical transport network. Gigalight and Eoptolink also supply industrial QSFP28 4WDM-40 transceivers for 5G middlehaul/backhaul network. However, the best choice is up to the requirements of customers. And for general 100GE 40km DCI application, the single-rate 100GE QSFP28 4WDM-40 transceiver is still the best choice.

TypeInfo: Blog Articles

Keywords for the information: