Sales Support:

Tel: +86-0755-26734300

Tech Center:



Tunable SFP+/XFP & AAWG Solution for 50GHz DWDM Systems

The conventional optical sources in optical communication industry are from the laser modules with fixed wavelengths. However, with the continuous development and promotion in application of optical communication systems, the disadvantages of DWDM lasers with fixed wavelengths have gradually been revealed, which lead to the waste in resources and the increase in costs. For this, Gigalight will publish a solution: Tunable optical module.

To devise a more precise solution for the case, it's necessary to detailedly know what demerits of DWDM lasers are in advance. Therefore, Gigalight will briefly analyse them first before getting involved in our solution.

As we know, weaknesses of DWDM lasers refers to these aspects. For one thing, with the development of technology, the amount of wavelength in DWDM 50GHz has reached the hundreds. Meanwhile, in the occasion that protection needs to be provided, the backup of each laser must be provided by the laser with substitutable wavelengths, which causes the increase in the quantity of backup DWDM optical module and in operating cost. For another thing, the quantity of stock in specific channels is difficult to predict on account that the wavelength of common DWDM optical module is fixed, which result in the increase in stock quantity of DWDM optical module with fixed wavelength. In addition, if the dynamic wavelength allocations in optical networks need to be supported and network flexibility needs to be improved, large number of common DWDM optical modules with different wavelengths are in demand. However, the usage rate of each optical module is very low, to some degree, this will bring about a waste of resources.

After realizing where the problems exist, Gigalight develops a tunable optical module (SFP+ and XFP packages are provided) as the solution to solve them. In the solution, different DWDM wavelengths can be configured and output in the same optical module, and these wavelength values and intervals meet the requirements of ITU-T (50GHz DWDM ITU-T Full C-band). The wavelength-tunable optical module is with flexibly in selecting working wavelength, which is with very large practical value in optical fiber communication wave division multiplexing system, in optical add and drop multiplexer and optical cross-connection, in optical switching equipment, in optic source spare parts and so on.

In addition, Gigalight tunable DWDM optical module adopts the chips with built-in integrated laser and MZ modulator, meets the ITU-T (50GHz DWDM ITU-T Full C-band) requirements and is with a tunable range of 90 channels based on 50GHz channel spacing. It will provide equipment manufacturers and operators with great flexibility, achieve the optimization for the overall network performance and greatly reduce the demand of existing operators for DWDM SFP + module inventory.

At the same time, for the 10G tunable DWDM optical transceiver, Gigalight launches two types of products: DWDM SFP+ and DWDM XFP.

Gigalight 10G tunable DWDM SFP+ optical module is with low power consumption, lower than 1.7W. The wavelength of this module is stable and the transmit optical power is about 0dBm. The extinction ratio is greater than 10dBm; the side die suppression ratio is greater than 51dB, the eye-diagram crossing point is between 47% and 52 %, and the sensitivity of this module can reach above -24dBm, a full 80KM optical fiber working distance.

Gigalight 10G tunable DWDM XFP optical module is divided into two versions to support FEC coding function (OTN G.709 framing) and non-FEC coding function. The power of DWDM tunable optical module supporting FEC coding function (OTN G.709 framing) is slightly large (lower than 4.5W), and the advantage of FEC coding function is to improve the sensitivity of transmission; while the power of DWDM tunable optical module without FEC function is slightly small (lower than 3.5W). The two versions are available to meet the working distance of 80KM optical fiber as well as to be compatible with the switches and core routers of Cisco, Juniper and other major equipment suppliers.

Gigalight has also developed 50GHz AAWG DWDM MUX/DEMUX within 1U chassis package (able to be installed in a 19-inch rack) as the solution based on single-chip. This equipment is passive, without the need of supplying power, and with 80/88/96 channel configuration optional; meanwhile, it provides DWDM upgraded port and monitor port. Compared with inter-leaver plan, it has the advantages of low insertion loss and low cost.

The following is the diagram of combination scheme between Gigalight tunable optical module(SFP+/XFP) and 50GHz DWDW 1U chassis equipment for your reference.