100G QSFP28 SR2 VCSEL 850nm 100m Optical Transceiver

GIGALIGHT 100G QSFP28 SR2 optical transceiver are used for short-range interconnections between devices within data centers.The module incorporates 2 channels 850nm VCSEL Array and PIN photo detector array. This results in an aggregate bandwidth of 100Gbps into a MPO cable. This module can convert 4 channels of 25Gbps (NRZ) electrical input data to 2 channels of 50Gbps (PAM4) optical signal, and also can convert 2 channels of 50Gbps (PAM4) optical signal to 4 channels of 25Gbps (NRZ) electrical output data.Maximum link length of 100m OM4,70m OM3 (DSP KP4-FEC is ON).

Description

QSFP28 module form factor
Support QSFP28 SFF-8436/8636
2×53.125Gbps(26.5625GBd) PAM4 parallel optics architecture
4×25.78125Gbps NRZ retimed electrical I/O
2 channels 850nm VCSEL Array and PIN photo detector array
Internal 4:2 Gearbox with KP4 FEC circuits on both receiver and transmitter channels
Single MPO12/APC receptacle(Only use channel 1 and channel 2)
Maximum link length of 100m OM4,70m OM3 (DSP KP4-FEC is ON)
Built-in digital diagnostic functions
Operating case temperature range: 0 to 70°C
Single 3.3V power supply
Low power consumption < 4W
RoHS compliant (lead free)

P/N	Description
GQS-MPO101-SR2C	100G QSFP28 SR2 VCSEL 850nm 100m Optical Module

Additional information

Product Type	Pluggable Optical Modules
Application	Data Center
Data Rate	100G-112G
Protocol	Ethernet
Form Factor	QSFP28
Reach	0.5m-2km
Media Type	MMF
Wavelength	850nm
Interface	MPO/MTP

Data Sheet

100G QSFP28 SR2 – GQS-MPO101-SR2C

100G QSFP28 SR2 VCSEL 850nm 100m Optical Transceiver

Description

Additional information

Data Sheet

Related Products

Get a Quote